Search results for "Cement paste"

showing 8 items of 8 documents

Studies on mechanism and physico-chemical parameters at the origin of the cement setting. I. The fundamental processes involved during the cement set…

1995

Abstract The mechanical evolution and the structure of the cement paste have been analysed in relation with the chemical evolution of the system. The setting process can be described as following two fundamental steps: the coagulation of cement grains during the first minutes following the mixing, and the rigidification of the coagulated structure which arises simultaneously with the acceleration of the hydrates formation During the coagulation step, the structure formed is proved to be mechanically reversible. The rigidification of the coagulated structure is provided by the hydrates formation in the contact zone. The increase of the paste cohesion at this stage is proportional to the quan…

CementChemical evolutionMaterials scienceChemical engineeringMixing (process engineering)Coagulation (water treatment)Contact zoneMineralogyGeneral Materials ScienceBuilding and ConstructionCement pasteCement and Concrete Research
researchProduct

On the physico-chemical evolution of low-pH and CEM I cement pastes interacting with Callovo-Oxfordian pore water under its in situ CO2 partial press…

2014

International audience; Abstract Within the framework of geological repositories for radioactive waste, structural concretes must be adapted to the underground chemical conditions. CEM I cement-based materials are characterised by high pH that may produce an alkaline plume in the near-field of the repository. In order to avoid this problem, low-pH cements have been designed. This study compares the physico-chemical behaviour of a low-pH material with a CEM I cement paste, both being subjected to leaching by an aqueous solution. An original experimental setup was designed to reproduce the underground conditions using a specific CO2 regulation device. Under these conditions, the low-pH materi…

CementMaterials scienceAqueous solutionta114Precipitation (chemistry)Microstructure (B) Carbonation (C) Cement paste (D) Durability (C) Degradation (C)MineralogyRadioactive wasteBuilding and Construction010501 environmental sciences010502 geochemistry & geophysicsMicrostructure01 natural sciencesPore water pressureChemical engineeringGeneral Materials Science[PHYS.PHYS.PHYS-CHEM-PH]Physics [physics]/Physics [physics]/Chemical Physics [physics.chem-ph]Leaching (metallurgy)Porosity0105 earth and related environmental sciencesCement and Concrete Research
researchProduct

Influence of three types of superplasticizers on tricalciumaluminate hydration in presence of gypsum.

2006

International audience; Different types of superplasticizers have been widely used over the past few decades in order to produce a more fluid or very high strength and durable concrete. These chemical admixtures interfere with the various physico-chemical processes occurring in early cement paste. In this paper we present results from a study on the influence of superplasticizers on pure tricalciumaluminate hydration in presence of gypsum. The suspensions hydration has been investigated by conductimetry, isothermal calorimetry and total organic carbon analysis of the liquid phase. The time taken for ettringite formation has been determined without superplasticizer and in presence of three d…

Ettringite[CHIM.MATE] Chemical Sciences/Material chemistryGypsumtricalcium aluminateSuperplasticizerIsothermal titration calorimetrytricalcium aluminate.[CHIM.MATE]Chemical Sciences/Material chemistryengineering.materialCement pastechemistry.chemical_compoundsuperplasticizerAdsorptionchemistryChemical engineering[ CHIM.MATE ] Chemical Sciences/Material chemistryengineeringTricalcium aluminateDissolutionhydration
researchProduct

A Two-Stage Reconstruction of Microstructures with Arbitrarily Shaped Inclusions

2020

The main goal of our research is to develop an effective method with a wide range of applications for the statistical reconstruction of heterogeneous microstructures with compact inclusions of any shape, such as highly irregular grains. The devised approach uses multi-scale extended entropic descriptors (ED) that quantify the degree of spatial non-uniformity of configurations of finite-sized objects. This technique is an innovative development of previously elaborated entropy methods for statistical reconstruction. Here, we discuss the two-dimensional case, but this method can be generalized into three dimensions. At the first stage, the developed procedure creates a set of black synthetic …

FOS: Computer and information sciencesComputer science02 engineering and technologylcsh:Technology01 natural sciencesArticleComputational Engineering Finance and Science (cs.CE)0103 physical sciencesCluster (physics)Effective methodGeneral Materials ScienceComputer Science - Computational Engineering Finance and Sciencelcsh:Microscopy010306 general physicslcsh:QC120-168.85lcsh:QH201-278.5Pixellcsh:Tmulti-scale entropic descriptorsrandom heterogeneous materials021001 nanoscience & nanotechnologyMicrostructureStandard techniqueCement pastetwo-stage reconstructionlcsh:TA1-2040simulated annealing for clustersSimulated annealinglcsh:Descriptive and experimental mechanicslcsh:Electrical engineering. Electronics. Nuclear engineeringlcsh:Engineering (General). Civil engineering (General)0210 nano-technologylcsh:TK1-9971AlgorithmMaterials
researchProduct

Controlling the cohesion of cement paste

2005

The main source of cohesion in cement paste is the nanoparticles of calcium silicate hydrate (C-S-H), which are formed upon the dissolution of the original tricalcium silicate (C(3)S). The interaction between highly charged C-S-H particles in the presence of divalent calcium counterions is strongly attractive because of ion-ion correlations and a negligible entropic repulsion. Traditional double-layer theory based on the Poisson-Boltzmann equation becomes qualitatively incorrect in these systems. Monte Carlo (MC) simulations in the framework of the primitive model of electrolyte solution is then an alternative, where ion-ion correlations are properly included. In addition to divalent calciu…

Inorganic chemistryIonic bonding02 engineering and technologyElectrolyteCement pasteCSH010402 general chemistry01 natural scienceslaw.inventionchemistry.chemical_compoundlawElectrochemistryGeneral Materials Sciencecalcium silicate hydrateCalcium silicate hydrateDissolutionionic correlationsSpectroscopyion-ion correlations[CHIM.MATE] Chemical Sciences/Material chemistrySurfaces and Interfaces[CHIM.MATE]Chemical Sciences/Material chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsPotassium sulfateSilicate0104 chemical sciencesC-S-HPortland cementchemistryChemical engineering[ CHIM.MATE ] Chemical Sciences/Material chemistryCalcium silicatenanoparticles0210 nano-technologycement cohesioncharge reversal
researchProduct

The effect of polycations on early cement paste

2010

International audience; This paper studies the possibility for improving the ductility of cement based materials by means of oligocationic additives. Actually, the setting of cement is due to ionic correlation forces between highly negatively charged C-S-H nanoparticles throughout a calcium rich solution. The main drawback of this strong attraction is its very short range that results in low elastic deformation of hydrated cementitious materials. A way to enlarge the attraction range between C-S-H particles would be to add cationic oligomers that would compete with calcium ions modifying the ionic correlation forces via a bridging mechanism of longer range, which could lead to a more ductil…

Materials scienceBridging forceIonic bonding02 engineering and technology010402 general chemistry01 natural sciencesOligomerchemistry.chemical_compoundPolymers (D.)General Materials ScienceComposite materialCalcium silicate hydratechemistry.chemical_classificationCement paste (D.)Cationic polymerizationBuilding and ConstructionPolymer021001 nanoscience & nanotechnologyTensile properties (C.)0104 chemical sciences[ PHYS.PHYS.PHYS-CHEM-PH ] Physics [physics]/Physics [physics]/Chemical Physics [physics.chem-ph]MonomerchemistryChemical engineeringPolymerization[PHYS.PHYS.PHYS-CHEM-PH]Physics [physics]/Physics [physics]/Chemical Physics [physics.chem-ph]Cementitious0210 nano-technology
researchProduct

Du gâchage à l'état durci, ce sont les mêmes liaisons qui sont à l'œuvre

1998

(1998). Du gâchage a l'etat durci, ce sont les memes liaisons qui sont a l'œuvre. Revue Francaise de Genie Civil: Vol. 2, No. 7, pp. 759-765.

Materials scienceHardening (metallurgy)Mechanism analysisGeneral MedicineComposite materialElastic modulusCement pasteRevue Française de Génie Civil
researchProduct

Study of the action of phosphate ions contained in the mixing water of the hydration of a Portland cement.

2005

Cementation is considered as the most attractive solution for the conditioning of low and intermediate radioactive wastes. The species contained in these wastes can strongly influence the reactivity of the cement pastes, it is in particular the case of the ortho-phosphate ions which are found in the evaporation concentrates. The aim of our work was to determine the influence of these ions on the hydration and the rheological properties of the cement pastes at early age as well as the mechanical and physical properties on the hardened material.

[CHIM.MATE] Chemical Sciences/Material chemistryions orthosphateorthophosphate ionsdimensional evolutionhydratationévolution dimensionnellemecanical propertiescement paste[ CHIM.MATE ] Chemical Sciences/Material chemistrypropriétés mécaniquesrheologyrhéologiehydrationpâte de ciment
researchProduct